Free Shipping Worldwide Over $150 | Quantity Discount $10 Each
Size
W445 H310 D145mm
Weight
About 1090g
Material
MASTERTEX-08TM (CORDURA Ballistic® Hollofil AirTM 1260d fabric 100% nylon breathable waterproof film L-Vent® laminated) CORDURA Ballistic® fabric 1680d Nylon (PVC coated) / Stair leather (3M SCOTCH GARD)
Attention
Please note that it is not completely waterproof and cannot prevent water from entering through the needle hole, which is the sewn part. If the nylon material is left wet for a long time, the film on the back side may peel off or deteriorate, so be sure to dry it before storing. The water-repellent finish is a surface finish, so the effect will diminish due to friction as you use it. In addition, the water repellency will be lost due to dust and other stains on the fabric. After use, it is recommended to clean it with brushing etc. and use a commercially available water-repellent spray diligently. * Please use the water-repellent spray that matches the material. When using it, please read the precautions carefully and then try blowing on an inconspicuous part. Due to the nature of the material, the attached leather has some color blur. Also, please note that discoloration and fading cannot be avoided.
Item Description
The main body material is INVISTA's CORDURA® brand fabric production, and at a certified factory that meets quality standards, two 315d Hollofil AirTM (66 nylon hollow yarn) are twisted together, and two warp and weft yarns are lined up. It is a fabric that has passed the CORDURA® brand fabric standard and is strong against friction, tearing, and fraying. PU coating is applied to the back side, and the special moisture permeable waterproof film L-VENT® is laminated to further improve water resistance, and it has a 3-layer structure with tricot nylon bonded. MSPC PRODUCT original fabric "MASTERTEX-08TM" that has durability, water resistance, and water repellency. The attached material is high quality steer leather from North America, and "3M" waterproofing agent is used at the tanning stage. I put it in a drum and let it penetrate into the leather. After that, the base is made by dyeing and soaking in oil, and the waterproofing agent made by the same company is sprayed even at the finishing stage to further improve the waterproofness. Waterproof, oil-proof, and stain-proof leather that has passed the monitoring test of 3M's "SCOTCHGARD_". The test is performed even if the surface is scraped, so the effect will not be diminished. INVISTA's 1680D Cordura Varis® Tech Nylon, which has about 5 times the wear, tear strength and durability of normal nylon, is used for the material such as the bottom surface, and PVC processing is applied to the back surface to further improve strength and waterproofness. I'm letting you. In terms of functionality, the shoulder harness cushion uses Outlast®, a temperature control material developed for NASA, and the mesh material is finer and softer than previously used. Adopt things. At the bottom of the front, an original tape is placed, which is made by weaving a loop-shaped tape with a slitted fabric that has a reflective function, in consideration of safety at night.
