[Pre-order] Grave Backpack No.03170 03170

Size

W290 H490 D180 mm

Weight

Approximately 2070g

Material

MASTERTEX-09™ (CORDURA Ballistic® Hollofil Air™ fabric 1680d x 840d 100% nylon, laminated with breathable waterproof film L-Vent®) / CORDURA Ballistic® fabric 1680d nylon (PVC coating) / Oiled velour leather / Steer leather (3M SCOTCHGARD®)

Attention

Please note that it is not completely waterproof, so it cannot prevent water from entering through the needle holes in the stitching. If nylon material is left wet for a long time, the film on the back may peel off or deteriorate, so be sure to dry it before storing it. Since the water-repellent treatment is a surface treatment, the effect will fade with use due to friction, etc. In addition, the water-repellent power will be lost due to dust and other dirt that adheres to the fabric. After use, we recommend removing dirt by brushing appropriately and using a commercially available water-repellent spray frequently. *Please use a water-repellent spray that is suitable for the material. When using, please read the precautions carefully and then test spray on an inconspicuous part. The included suede does not have a layer of gin, so if water is left on it for a certain period of time, water will seep in. The included leather may have wrinkles and scratches unique to individual leathers. Please note that color transfer and discoloration may occur due to friction, etc. Please note that since it is natural leather, it may become stained if it gets wet in rain or water. Please note that product specifications are subject to change without notice.

Item Description

*This is a pre-order item. Items will be shipped after Friday, May 16th. The look combines high-tech and low-tech elements, with original high-performance fabric and velour leather.

A high-end casual series equipped with master-piece's signature features, such as "m-strap 2", which reduces the load on the body.

The main body material is master-piece's original fabric "MASTERTEX-09™", which is durable, water-resistant, and water-repellent.

This fabric is woven at a certified factory that meets INVISTA's CORDURA® brand fabric production and quality standards, using 840d warp threads and 420d weft threads made from two twisted strands of Hollowfil Air™ (66 nylon hollow thread).The fabric has passed the CORDURA® brand fabric standards and is strong against friction, tearing, and abrasion.

The reverse side is PU coated and laminated with a special breathable waterproof film L-VENT® to further enhance water resistance, and is then bonded with tricot nylon to create a three-layer structure.

The accessory materials are made of two types of leather and fabric. The leather used on the front face is made from carefully selected rawhide with fine fibers that is tanned with oil to create a water-repellent velour leather.

Since it does not have a silver layer, it is not only breathable, but also thick and sturdy. It features a unique, warm, fuzzy surface.

The leather used for other parts is carefully selected high-quality domestic steerhide, and during the tanning process, a waterproofing agent made by 3M is placed in a drum and allowed to penetrate into the leather.

The wood is then dyed and oiled to create a base, and the finishing touch is sprayed with the company's own waterproofing agent to further enhance its water resistance.

This is a waterproof and stain-resistant leather that has passed the 3M SCOTCHGARD® monitoring test. The test is conducted even if the surface is scraped, so the effect will not weaken.

The material used for the bottom and other parts is INVISTA's 1680d Cordura ballistic® nylon, which has approximately five times the abrasion, tear strength and durability of regular nylon, and the back is PVC-coated to further improve strength and water resistance.

The shoulder pad cushion has a five-layer structure excluding the outer layer, and uses very light and elastic EVA resin and Fusion® from Asahi Kasei Advance Corporation, which is also used in bedding and car seats.

Fusion® is a revolutionary three-dimensional knit fabric created by Asahi Kasei, which has excellent cushioning properties by connecting two pieces of knitted fabric with elastic yarn. It also has a diagonal structure, which gives it excellent shape stability.

The parts closest to the body are made of Outlast®, a temperature regulating material developed for NASA, and a soft, finely woven double Russell mesh.

Furthermore, the backpack is equipped with an original mechanism called "m-strap 2" that reduces the load on the body. Not only does it provide cushioning, but it also fits the shoulders of a variety of people, making it comfortable to use.

In terms of storage, there are various pockets, large and small, inside and out, designed for ease of use, whether on or off the job.