W430 H300 D140 mm
0.2mm thick PVC coating back 600d polyester / 0.44mm thick embossed tarpaulin / PVC mesh / MASTERTEX-05 (CORDURA® 420d nylon 100% breathable waterproof film L-Vent® laminated) / 1680d nylon back PVC
Due to the characteristics of the tarpaulin material, color transfer may occur depending on the storage conditions. Please note that it is not completely waterproof and cannot prevent water from entering through the zipper or the needle hole that is the sewn part.
The body is made of 600d polyester with a 0.2mm thick P.V.C. coating for added waterproofness. The base fabric, polyester fabric, is an environmentally friendly material that is dyed with a dye that does not contain harmful substances such as hexavalent chromium. The accessory is made of 0.44mm thick tarpaulin, which is processed with embossed roll to give the texture of the fabric a depth, and is extremely waterproof and durable. The mesh used for the front pocket is woven with nylon thread and dipping into PVC while stabilizing the dimensions to make it a durable mesh. Two types of fabrics are used for the load-bearing areas to increase strength. CORDURA® brand fabric Vertical / horizontal 420d 66 nylon yarn (bright yarn) that meets the standards is driven in with high density to provide strength against friction, tearing, fraying, etc., and a special breathable waterproof film L-Vent® Durability on the back side of 1680d nylon, which has been strengthened by using MASTERTEX-05 nylon, which is an original fabric with a 3-layer structure that is laminated with tricot nylon, and two 840d threads twisted together. It will be a fabric with a PVC coating to enhance. The original key ring that comes with all models can be attached to the tape attached in a loop at the design point. The storage space of the mesh part can be used as a space to put sandals and wet towels, and the pocket of the waterproof zipper is a highly waterproof pocket because both sides are matched with tarpaulin.