Free Shipping Worldwide Over $150 | Quantity Discount $10 Each
Size
W320 H230 D120 mm
Weight
740g
Material
No. 11 flame-retardant canvas / 600d polyester (back PVC coating)
Attention
The main body fabric is flame-retardant and not flame-proof, and when it hits a fire, it carbonizes black and has the effect of softening the spread of fire. In addition, because the surface pigment coat is applied, white streaks (whitening) and white particles such as NEP are generated on the surface and needle holes. Color fading may occur due to friction or moisture, and discoloration may occur due to direct sunlight or aging. If you leave it wet for a long time, it may cause discoloration or deterioration, so be sure to dry it before storing. Due to the manufacturing process of reflect tape, crimp marks during welder processing and seams on the reflective sheet occur. Also, please note that the surface may turn yellow due to aging or humidity. Please note that it is not completely waterproof and cannot prevent water from entering through fasteners or needle holes that are sewn parts. Please note that product specifications are subject to change without notice.
Item Description
For the main body fabric, we use No. 11 flame-retardant canvas, which is the image of the fabric used for military use. Cotton is used for the warp yarn and flame-retardant yarn is used for the weft yarn, and the fabric is deepened by dyeing it in slightly different shades by adding shades in two dyeings. Although the weft yarn is a synthetic fiber, it has a natural texture like cotton canvas because it is a spun yarn. If it is a normal cotton, it will burn and spread once it is ignited, but by using a flame-retardant thread, it has an autolysis function even if it is ignited. The LOI value (limiting oxygen index), which indicates the incombustibility of fibers, is 26 or more, and flame retardancy is recognized, but this flame-retardant canvas has as many as 30. Normal cotton is about 18, nylon and polyester are about 20, and the larger the number, the harder it is to burn. For the attached fabrics other than No.02822, polyester that looks like cotton but is lighter and more robust is used, and polyester ox woven with 600d yarn is used for both vertical and horizontal. I am. After dyeing, it is water repellent, and the back side is also PVC treated to improve waterproofness and strength. The interior fabric facing the outside is topped with flame-retardant chloroplane rubber, and the surface is coated with aluminum to make it flame-retardant and heat-resistant. The soft texture, which is also a characteristic of rubber, is not easily affected by the outside temperature. This flame-retardant processing is also used for emergency carry-out bags, etc., and is a fabric that has been certified for disaster prevention. The reflective tape placed on the front has a smooth and flat surface covered with a reflective layer even if moisture such as rain adheres, so it can also reflect light sources refracted by water. The name of the master-piece turns yellow at about 39 degrees or higher, and has a function to call attention at high temperatures. No.02820 and No.02821 have a chest belt, and No.02822 and No.02823 have parts with a whistle function. The slider part of the main fastener has a keyhole, and you can improve security by attaching your own lock. The headlamp MS-G2 / USB Multi Function Model belt of the outdoor brand “milestone” has been changed to a master-piece original camouflage design with impactful coloring. A collaboration specification with a sub-belt for attaching to various bags is set up for all bags. By attaching this high-performance headlamp to the shoulder belt or the bag body, you can ensure the visibility of your feet, improve the safety and visibility at night, and make the bag a more sophisticated item. In addition, it is equipped with a pocket that also has a lantern shade function in the front storage space. It is possible to hang the headlamp inside and use it like a lantern.
